$30.95
Motor with optical control
Motor using optical interrupter as a sensor.
This is quiet, reliable but a little slower motor.
This motor uses standard AA size batteries (not supplied). Included jumper wire allows to experiment with different voltages.
Soldering iron required for assembly; you may add an inexpensive one with some solder below.
| Weight | 8 oz |
|---|---|
| Dimensions | 6.25 × 5.75 × 1.5 in |
| Difficulty level | 3 – more difficult, requires the use of a soldering iron |
| Typical speed | 1200 RPM (4.5 V) — 2000 RPM (6 V) |
| Voltage | 4 – 6 V (15 V max); heat sink for the transistor (optional) is recommended for 12 V or higher voltages |
| Assembled dimensions | 6" x 6" x 2" |
| Weight | 7 oz |
Reviews
There are no reviews yet.