$27.95
Reed switch motor with transistor control
Reed switch motor with transistor control which significantly increases the life of the reed switch.
This motor uses standard AA size batteries (not supplied). Included jumper wire allows to experiment with 3 different voltages: 3, 4.5 and 6 Volts.
Soldering iron required for assembly; you may add an inexpensive one with some solder below.
| Weight | 8 oz |
|---|---|
| Dimensions | 6.25 × 5.75 × 1.5 in |
| Difficulty level | 2 – simple, but requires the use of a soldering iron |
| Typical speed | 1600 RPM (3 V) — 2500 RPM (4.5 V) — 2900 RPM (6 V) |
| Voltage | 3 – 6 V (15 V max); ZNR (included) is recommended for voltages higher than 4.5 V, and heat sink for the transistor (optional) is recommended for 12 V or higher voltages |
| Assembled dimensions | 6" x 6" x 1.75" |
| Weight | 7 oz |
Reviews
There are no reviews yet.