$22.95
Reed switch motor with 2 magnet rotor
Simple reed switch motor with 2 magnets/2 surface rotor and no battery holder.
This motor requires a separate power supply (not provided with the kit), for example, 6 Volts lantern battery as shown.
If the rotor stops in the position different from the one shown in the picture the motor might need a slight push to start running.
| Weight | 7 oz |
|---|---|
| Dimensions | 6.25 × 5.75 × 1.5 in |
| Difficulty level | 1 – simple, no special tools required |
| Typical speed | 1200 RPM (1.5 V) — 1900 RPM (3 V) — 2300 RPM (4.5 V) — 2500 RPM (6 V) |
| Voltage | 1.5 – 12 V (15 V max); voltages higher than 3 V require use of the ZNR |
| Assembled dimensions | 6" x 6" x 1.75" |
| Weight | 7 oz |
Stan –
The original motor and still my favorite 🙂